freefall_800
Open source replacement control firmware for Masterbuilt Gravity series electronically controlled charcoal smokers, reverse engineered from the stock control PCB and rebuilt from scratch. Basic functionality is working with a fully local control web app, plus an Android app and Home Assistant integration. Ongoing work includes interface refinements and more advanced control sequencing features.
What it addresses
The smoker hardware is good, but like most IoT devices, the stock firmware and app are poor.
Shared over time
Each entry reflects what was shared on that date. Details may have changed since then.
freefall_800
Open source replacement control firmware for Masterbuilt Gravity series electronically controlled charcoal smokers, reverse engineered from the stock control PCB and rebuilt from scratch. Basic functionality is working with a fully local control web app, plus an Android app and Home Assistant integration. Ongoing work includes interface refinements and more advanced control sequencing features.
Problem: The smoker hardware is good, but like most IoT devices, the stock firmware and app are poor.
Posted by @prbs23 · Original comment ↗
“I'm working on building open source control firmware that runs on the Masterbuilt Gravity series electronically controlled charcoal smokers. https://gitlab.com/prbs23/freefall_800”